REES52 ESP8266 Weather Station IoT Starter Kit for Arduino IDE with ESP8266 ESP-12E Development Board 0.96″ OLED Display and DHT11 Temperature and Humidity Sensor

Price: ₹1,000 - ₹370.00
(as of Oct 10, 2025 19:10:09 UTC – Details)

Name: Rees52 esp8266 weather station iot starter kit specification: Esp8266 esp-12e development board 802.11 b/g/n protocol wi-fi direct (p2p), soft-ap integrated tcp/ip protocol stack integrated tr switch, balun, lna, power amplifier and matching network integrated pll, regulators, and power management units +19.5dbm output power in 802.11b mode integrated temperature sensor supports antenna diversity power down leakage current of integrated low power 32-bit cpu could be used as application processor sdio 2.0, spi, uart stbc, 1×1 mimo, 2×1 mimo a-mpdu and a-msdu aggregation and 0.4 s guard interval wake up and transmit packets in standby power consumption of 0.96″ 128×64 pixel oled display size: 0.96” resolution: 128×64 supported platforms: For arduino, esp series, 51 series, msp430 series, stim32 / 2, scr chips driver ic: Ssd1306 communication: Iic vcc: 3.3~5v gnd: Ground scl: Serial clock sda: Serial data dht11 temperature and humidity sensor digital signal output vcc: 3.3v~5v gnd: Ground data: Mcu io port tips: Do not reverse the vcc and gnd, otherwise it will burn package including: 1pcs esp8266 esp-12e development board 1pcs 0.96″ oled display 1pcs dht11 temperature and humidity sensor 1pcs 40x10cm female-female jumpers 1pcs usb cable
The ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96″ OLED display, a DHT11 Temperature and Humidity Sensor, 40x10cm female-female jumpers, a USB cable as well as a UCTRONICS user guide (link for download), the breadboard shown in the picture is not included
Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download without reset
The 0.96″ 128×64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed
DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature measurement range: 0~50°C, temperature measurement accuracy: +/-2°C
ESP8266 Weather Station IoT Starter Kit gets the current and forecast weather information from an online service and displays the expected conditions on a 128X64 pixels OLED display with nice icons. The program uses a side scrolling carousel to display the date, time. In addition, it displays the information about 3-day forecast temperature and humidity through DHT11 sensor. Contact us through Buyer-Seller Messages for further help.